PanDigital Αρχική Γρηγορίου Επισκόπου 17
Τ.Κ 24001 Πύλος Μεσσηνίας
Τηλ: 27230 28200
Fax: 27230 28201
 
25/4/2024

i1 Series ND16/CP Filter

i1 Series ND16/CP Filter
i1 Series ND16/CP Filteri1 Series ND16/CP Filteri1 Series ND16/CP Filteri1 Series ND16/CP Filter
SRP

The i1 Series ND16/CP filter is a professional combination ND16 (ND16 = ND 1.2, 4.8 - 5.5 stops depending on orientation of the CP) and circular polarizer filter for the DJI Inspire 1 camera.  The protective UV filter that comes standard on the Inspire 1 is screwed off and this filter is screwed on in it's place.  This neutral density filter reduces rolling shutter artifacts (e.g. jello) by slowing the shutter speed of the Inspire 1 camera while the circular polarizing qualities of the filter cut glare and increase the contrast between clouds and the sky.  The i1 Series ND16/CP filter is recommended for moderate to bright sunlight.    

The outer knurled ring offers extra grip for installing or removing the filter. The separate knurled adjusting ring at the front is laser marked with an arrow to aid in adjusting the CP to the perfect position. 

The ring of every SRP i1 ND/CP filter is marked in nearly the same orientation in terms of the polarizing film's reference to the arrow. This is done for repeatability.  For example, if you find that ideal arrow position is in the 2 o'clock position when shooting at a certain time of day, with the sun at your face, on the next shot you can to repeat this same position with ease.  Because the arrow orientation is the same for the ND8/CP and ND16/CP filters from SRP you can swap between these filters as the intensity of the sunlight changes while maintaining the perfect polarization level.

To set polarization, do the following:

  1. Hold the filter up to your eye. 
  2. Look in the direction where reflections pose the biggest problems or at the sky shots in which you wish to improve contrast.
  3. Rotate the adjusting ring to the optimal position. 
  4. Look at the front of the filter and note where the arrow is pointing with respect to the ground.
  5. Thread the filter onto the camera and rotate the adjusting ring to the noted position.

Filter weight: 9.5 g

Note: The adjustment ring on the filter will cause slight vignetting in photo mode.  Crop 4000 x 3000 photos to 3700 x 2775 to remove vignetting in still photos. There is no vignetting in video mode.

Νέο Προϊόν
Όνομα:
i1 Series ND16/CP Filter
Κωδικός:
i1nd16/cp
Τιμή:
60.00 €
Διαθεσιμότητα:
Διαθέσιμο Κατόπιν Παραγγελίας